Fujitsu PRIMERGY TX300 S4 Operating Manual page 65

Hardware installation
The corresponding indicators are explained in section
page 76.
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê Connect the devices.
You can find an additional USB port on the front of the server (see figure
page 71).
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, the keyboard and the mouse to the standard ports of
the server (see figure
Ê Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or into the mains socket strip of the rack.
V
CAUTION!
The rated current for the monitor can be found on the technical data label
on the monitor or in the operating manual for the monitor.
TX300 S4
19 on page 64).
Operating manual
Connecting devices to the server
"Rear of server" on
23 on
65