Installation And Planning Notes; Installation Requirements; Storage/Transport; General Operating Conditions - Miele PW 811 Installations Plan

PW 811 / PW 814 / PW 818

Installation requirements

The washing machine must be installed and commissioned by a
Miele Service technician or by an authorised service technician.

The washing machine must be installed in accordance with
applicable regulations and standards. Local energy and water
supplier regulations must also be observed.

This washing machine must only be operated in a room that has
sufficient ventilation and which is frost-free.
This machine should not be installed or operated in any area where
there is a risk of explosion.

Storage/Transport

The following conditions must be observed for transport and storage:
– Ambient temperature: 0-40 °C
– Humidity: non-condensing

General operating conditions

This washing machine is intended only for use in a commercial
environment and must only be operated indoors.
– Ambient temperature of installation location: 0-40 °C
– Relative humidity: non-condensing
– Maximum height above sea level of installation site: 2000 m
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Useful tip: Have the installation site inspected and seek the advice of
a professional in instances where increased noise may cause a
nuisance.

Installation and planning notes

5