HP ProLiant DL785 User Manual page 11

system attributes. The System Insight Display LEDs identify components experiencing an error,
event, or failure.
CAUTION: Do not block airflow by pushing the SID flush against the server while it is in the
down position.
IMPORTANT: When removing the access panel to view the Systems Insight Display LEDs, leave
the server powered on. The Systems Insight Display LEDs are cleared when the server is powered
off.
NOTE:
The system management driver must be installed for the internal system health LED
to provide pre-failure and warranty conditions.
LED
POWER
INT HEALTH
EXT HEALTH
TEMP
FAN X
PS X
IO BOARD
SPI BRD
SPI ILK
MP INTERLOCK
CPU INTERLOCK
PROCESSOR/MEMORY BOARD X
DIMM 1A-8D
Component
System power
Internal component health
External component health
Over temperature
Fan
Power supply
I/O backplane power
SPI board power
SPI board not fully seated into the I/O backplane
I/O backplane not fully seated into the midplane board
Processor memory board cell 8 (boot CPU) not fully seated into the midplane
board
DIMM slot
System Insight Display LEDs 11