NOTE:
rear panel
3.
Lift up on the hood latch and remove the access panel.
4.
After installing hardware options, replace the access panel. Be sure that the panel is securely
locked into place before powering up the server.
Accessing the System Insight Display
IMPORTANT:
(page
10)), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
To access the SID:
1.
Push the SID.
The T-15 Torx screwdriver is shipped with the server and can be located on the
("Rear panel components" (page
When viewing the Systems Insight Display LEDs
14)).
("System Insight Display LEDs"
Accessing the System Insight Display
33