Installing Ssds; Installing Hdds; Installing Pci-E/Gpu - Corsair AIR240 Installation Manual

SPEC-01

4. Installing SSDs

To install a SSD, first remove
the two top rear thumbscrews
and slide the cover off. Push
the tab down to release and
lift the cage, then insert your
SSD into one of the available
slots. The drive locks in once
fully inserted into the cage.
Reinsert the cage. Keep the
case top off if you later plan
to install fans here.

5. Installing HDDs

Remove the top left fan grill
and access the rear 3.5" HDD
tray enclosure. Insert your
HDD (or 2.5" SSD) into one of
the open slots. Align the drive
cage tray pins with the HDD
mounting holes and click each
pin into place. Insert the HDD
tray enclosure back into the
case.
7

6. Installing PCI-E/GPU

Unlatch the expansion slot
protector at the rear of the
case, slide out one (or more)
of the slot covers, and install
a PCI-E/PCI card. Close - and
optionally, apply a screw to
secure - the rear protective
latch.
AIR240 STEP6
AIR240 STEP6 (circle)
8