Miscellaneous Information; Cabinet Stabilization Measures; Method Of Securing The Cabinet To The Floor Surface - Fujitsu SPARC Enterprise M3000 Product Notes

Miscellaneous Information

Cabinet Stabilization Measures

This section shows useful methods of securing an M8000/M9000 server to prevent it
from shifting due to vibration.

Method of Securing the Cabinet to the Floor Surface

Vibration-proof Bracket
order number: CA06620-H901
■
By specifying the above, you can issue an order to get the following four kinds of
parts. (You should order the bolt separately.)
Fixing bracket: C230-4130-X514 (x4)
■
Bushing: C230-4080-X003 (x4)
■
Metal washer: F6-WB12-121 (x4)
■
Metal washer: F6-WM12-121 (x4)
■
Bolt: F6-B12-***121 (Bolt diameter: M12)
■
***= Bolt length (mm)
The bolt length must be specified here.
Note – Consult with the company that constructed the building because the length
depends on the structure of the building.
Vibration-proof Feet
order number: CA06620-H902
■
By specifying the above, you can issue an order to get the following parts. (You
should order the bolt separately.)
F6-DA6G (x4)
■
Change this board leg (height adjustment leg) to the "F6-DA6G" and tighten the bolt
from under the floor.
Chapter 6 Information About Hardware of M8000/M9000 Servers 91