Fujitsu SPARC Enterprise M3000 Product Notes page 39

XCP Issues Fixed in Releases Earlier Than XCP 1112 (Continued)
TABLE 3-3
M4000
ID M3000 M5000
RTIF1- O
070914-007
RTIF1- O
070914-008
RTIF1- O
070914-009
RTIF1- O
070914-010
RTIF1- O
070914-011
M8000
M9000 Description
O On the XSCF Web, when you use
Internet Explorer and select [Log
Archives], the [Status of Log Archiving]
screen doesn't show the status
information.
O On the XSCF Web, when you select
[POP] or [SMTP-auth] on the [SMTP]
screen to enter Password, the input
value doesn't appear as "*".
O On the XSCF Web, when selected [POP]
or [SMTP-auth] on the [SMTP] screen,
the setting can be done while the input
field remains blank. And despite the
setting done, the past setting data
appears.
O On the XSCF Web, on the [SNMPv3
Security Settings] screen, when you
select [Add User] or [Copy User] of the
[SNMP User-Based Security Model
(USM)], the [Create or Copy User]
screen appears as a pop-up. On this
screen, when you set the SNMP User
with 16 digits or more, it will be
registered correctly but the web
browser screen displays up to 15 digits.
O On the XSCF Web, on the [SNMPv3
Security Settings] screen, when you
select [Change Password] of the [SNMP
User-Based Security Model (USM)], the
[Change Password] screen appears as a
pop-up. On this screen, despite the
[Confirm Password] is a field which
must be entered, it is not displayed
with the note "* Indicates require
field."
Workaround
None available at this time.
None available at this time.
None available at this time.
When you set the SNMP User with 16
digits or more, use the showsnmpusm(8)
command.
Do not fail to set Confirm Password
which is a field must be entered.
Chapter 3 Information About Software 25