Table of Contents
Advertisement
NOTE:
Tighten the screws based on the order mentioned in the removal procedure.
3
Turn over the system board.
4
Connect the heat sink assembly cable to the system board.
5
Install the:
a
back cover
b
rear cover
c
memory module
d
SSD card
e
battery
f
base cover
6
Follow the procedure in
Touchpad
Removing the touchpad
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
SSD card
d
memory module
e
rear cover
f
back cover
3
Remove the M2x2L (4) screws from the touchpad board and slide from the display assembly [1, 2].
4
Lift the touchpad from the display assembly.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
35
Advertisement
Table of Contents
