Table of Contents
Advertisement
a
Disconnect the coin cell battery cable from the connector [1].
b Disconnect the hard drive cable from the connector [2].
4
Remove the following metal tab:
a
Remove the M2.5xL5(2) screws that secure the metal tab on the system board [1].
b Lift the metal tab that secures the power port on the system board [2].
c
Remove the M2.5xL5(2) screws that secure the metal tab on the system board [3].
d Lift the metal tab that secures the Thunderbolt port on the system board [4].
e
Disconnect the speaker cable from the system board [5].
Removing and installing components
29
Advertisement
Table of Contents
