Power Management screen options
Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
Enable Intel Speed
Allows you to enable or disable the Intel Speed Shift Technology.
Shift Technology
Default setting: Enabled
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
•
Wake on LAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
•
Advanced Battery
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge
charging algorithm and other techniques, during the non-work hours to improve the battery health.
Configuration
Primary Battery
Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Type-C connector
•
power
•
74
System setup
Disabled
Every Day
Weekdays
Select Days
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Disabled (Enabled)
LAN Only
Adaptive (default)
Standard — Fully charges your battery at a standard rate.
ExpressCharge — The battery charges over a shorter period of time using Dell's fast charging technology. This
option is enabled by default.
Primarily AC use
Custom
NOTE:
All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
7.5 Watts(selected by default)
15 Watts