Installing The Base Cover; Removing The Battery - Dell Vostro 15-7570 Owner's Manual

Installing the base cover

1 Align the base cover with the screw holders on the computer.
2 Press the edges of the cover until it clicks into place.
3 Tighten the M2.5x2+3.5 screws to secure the base cover to the computer.
4 Follow the procedure in
Battery

Removing the battery

1 Follow the procedure in
2 Remove the base cover.
3 To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Remove the M2x3L screws that secure the battery to the computer [2].
10 Removing and installing components
After working inside your computer.
Before working inside your computer.