Renault Lodgy 2017 Driver's Handbook Manual page 92

TYRE PRESSURE LOSS WARNING
Resetting procedure
With the ignition on:
– press button 3 briefly several times
to select the function "SEt tP" or, de-
pending on the vehicle, the message
"=0=" is displayed on the instrument
panel 2;
2.20
(2/3)
– press and hold (around 3 seconds)
the button 3 to start initialisation.
2
Flashing, for around five seconds,
followed by a constant display of the
message "SEt tP" or, depending on
3
the vehicle, "=0=" , indicates that the
reset request for the tyre pressure
reference value has been taken into
account.
Reinitialisation is carried out after a few
minutes' driving.
Note:
The standard tyre pressure cannot be
less than that recommended and indi-
cated on the door frame.
Display
Check tyre pressure

The warning light comes on (not
flashing).
This indicates that at least one tyre is
flat.
Check and, if necessary, readjust the
pressures of the four wheels when cold.

The warning light goes off after a
few minutes' driving.