Table of Contents
Advertisement
ABB-Welcome
Latch the device
Latch the upper part of the device onto its bottom part : place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of the
device until it is caught by the clamp.
Mounted with desktop bracket
1.
Fix the bottom of the device to the desktop bracket.
2.
Latch the upper part of the device onto its bottom part. To do this, place the upper
side of the device on the lock-in lugs and then press the bottom side onto the
bottom part of the device until the it is caught by the clamp.
The installation of the indoor station is now complete.
|
Mounting / Installation
— 65 —
Advertisement
Table of Contents
