Garmin GIA 63 Installation Manual page 81

4.7.2.3 To/From
Pin Name
VOR/LOC +TO
VOR/LOC +FROM (VOR/LOC COMMON)
VOR/LOC +FROM (NAV COMMON)
(011-01105-20 AND 011-01105-30 ONLY)
The output is capable of driving up to three 200 Ω meter loads. When indicating TO, the output is
+225 ±75 mV When indicating FROM, output is -225 ±75 mV
DC.
(Flag IN VIEW) the TO/FROM output is 0 ±10 mV
4.7.2.4 Flag
Pin Name
VOR/LOC +FLAG
VOR/LOC -FLAG (VOR/LOC COMMON)
VOR/LOC -FLAG (NAV COMMON)
(011-01105-20 AND 011-01105-30 ONLY)
GLIDESLOPE +FLAG
GLIDESLOPE -FLAG (GLIDESLOPE COMMON)
GLIDESLOPE –FLAG (NAV COMMON)
(011-01105-20 AND 011-01105-30 ONLY)
The Flag output is capable of driving up to three 1000 Ω meter loads. When valid information is present
(Flag OUT OF VIEW) the Flag output is 375 ±80 mV
VIEW) the Flag output is 0 ±25 mV
4.7.2.5 OBS
Pin Name
VOR OBS ROTOR C
VOR OBS ROTOR H (GROUND)
VOR OBS STATOR E (VOR/LOC COMMON)
VOR OBS STATOR E (NAV COMMON)
(011-01105-20 AND 011-01105-30 ONLY)
VOR OBS STATOR F
VOR OBS STATOR D
VOR OBS STATOR G (VOR/LOC COMMON)
VOR OBS STATOR G (NAV COMMON)
(011-01105-20 AND 011-01105-30 ONLY)
VOR OBS ROTOR C and H are a buffered 500 Hz output that is intended to drive the OBS rotors. VOR
OBS STATOR D and VOR OBS STATOR F are each phase and amplitude shifted version of the VOR
ROTOR C output. Each pair is intended to read one of the two windings of the indicator's OBS stator.
GIA 63 Installation Manual
190-00303-05
DC.
When invalid information is present (Flag IN
DC.
DC.
Connector Pin
P602 1
P602 2
When invalid information is present
DC.
Connector Pin
P602 3
P602 4
P602 32
P602 53
Connector Pin
P602 9
P602 10
P602 11
P602 12
P602 13
P602 14
I/O
Out
Out
I/O
Out
Out
Out
Out
I/O
Out
--
Out
In
In
Out
Page 4-21
Revision T