Garmin GIA 63 Installation Manual page 76

4.4.1.4 Can Bus
Pin Name
CAN BUS 1 HI
CAN BUS 1 LO
CAN BUS 1 TERMINATION
CAN BUS 2 HI
CAN BUS 2 LO
CAN BUS 2 TERMINATION
This data bus conforms to the BOSCH standard for Controller Area Network 2.0-B. This bus complies
with ISO 11898. CAN BUS TERMINATION should be connected to CAN BUS LO if GIA is located at
the end of the bus.
4.4.1.5 Ethernet HSDB
Pin Name
ETHERNET OUT A
ETHERNET OUT B
ETHERNET IN A
ETHERNET IN B
This Ethernet based high speed data bus (HSDB) provides communications capability with the GDU.
HSDB meets the hardware aspects of IEEE standard 802.3 for 10 base T Ethernet communications.
Page 4-16
Revision T
Connector Pin
P603 20
P603 22
P603 34
P603 32
P603 30
P603 39
Connector Pin
P603 2
P603 3
P603 76
P603 77
GIA 63 Installation Manual
I/O
I/O
I/O
--
I/O
I/O
--
I/O
Out
Out
In
In
190-00303-05