Table of Contents
Advertisement
Use the following procedure to replace a carbon brush.
a.
Insert
number facing upwards (see Figure 4-13).
b.
Insert the brush stopper.
4.4.9
Armature Removal
Use the following procedure to remove the armature.
a.
Remove the PCB.
b.
Insert
magnet cap and the motor flange as shown in Figure
4-14.
Figure 4-14
the
carbon
brush
two
nonmagnetic
Removing the Armature
4-15
with
the
identification
screwdrivers
between
the
Advertisement
Table of Contents
