Closing The Door Of The Fd1165; Busy Lamp On During Drive Select - NEC FD1165 Maintenance Manual

2.8.9.2

Busy Lamp On During Drive Select

To have the busy lamp on when a drive select signal
present, select BU2 and BS1.
2.8.9.3 Busy Lamp On During In Use
To have the busy lamp on when an In Use signal is present,
select BUI and remove the BS jumper.
2.9 OPERATING THE FD1165
This section describes inserting a flexible disk into the
disk drive and removing a flexible disk from the disk drive.
2.9.1 Inserting a Flexible Disk
Use this procedure to insert a flexible disk into the disk
drive.
a. Turn on the dc power supply.
b. Insert a flexible disk
flexible disk locks in place and close the door (see
Figure 2-13).
Figure 2-13
into the FD1165 until

Closing the Door of the FD1165

2-15
is
the