Dhcp Options From Rfc 2132 - Nomadix AG3100 User Manual

External DHCP Server IP
DHCP Relay Agent IP
DHCP Server
DHCP Server Subnet-based
Forwarded DHCP Clients
Server-IP
208.11.0.4
10.0.0.4
* Default IP Pool
DHCP IP Pools Configuration:
0 - Show IP Pools
1 - Add a new IP Pool
2 - Modify an IP Pool
3 - Remove an IP Pool
4 - Exit this menu
Select the DHCP Pool configuration mode [0]:

DHCP Options from RFC 2132

You can configure DHCP options as defined in RFC 2132. The configured options are sent to subscribers who
obtain their network configuration from the NSE via DHCP.
This capability only applies to the NSE's DHCP Server function. There is no change to the NSE's operation
as a DHCP client.
The options are configurable on a per-pool basis. Different sets of options can be configured for different
pools.
A given DHCP option consists of an option code and a value. RFC 2132 details the various available options,
and the data type for each. The NSE will validate the data entered to ensure that it is type-correct for the
option code in question. If it is incorrect, the option is not accepted.
Numerical integer values can be entered in decimal format, or hex format using a "0x" prefix.
The following DHCP option codes are supported:
Option Description
Single IP address
List of one or more IP addresses
List of zero or more IP addresses
List of one or more pairs of IP addresses (or address/mask pairs) 21, 33
32-bit unsigned integer value
16-bit unsigned integer value
8-bit unsigned integer value
List of 1 or more 16-bit unsigned integer values
Single octet Boolean (value may be 1 or 0)
Installing the Access Gateway
0.0.0.0
0.0.0.0
Enabled
Disabled
Disabled
Server-Netmask Start-IP
255.255.0.0 208.11.0.5
255.255.255.0 10.0.0.5
End-IP Lease
208.11.0.7 20
10.0.0.250 30
Option Code
16, 28, 32
3-5, 7-11, 41-42, 44-45, 48-49, 65, 69-76
68
2, 24, 35, 38
13, 22, 26
23, 37, 46
25
19-20, 27, 29-31, 34, 36, 39
A G
CCESS ATEWAY
Type IPUp
PRIV NO
PRIV NO *
57