Connecting The Transmitter To The Mains - Sennheiser RS 4200 Instructions For Use Manual

8
Connecting the transmitter via the SCART socket
C
If your sound source has a SCART socket, you can order the
suitable SCART adapter (see "Accessories" on page 16) from
your Sennheiser dealer.
Connect the connecting cable
Plug in the SCART adapter
If your TV has several SCART sockets, select a SCART socket
that is also an output (for details, see operating manual of
your TV).
Using an external microphone
D
If your sound source doesn't have a headphone or audio output,
SCART or RCA socket, you can use your RS 4200 together with
an external microphone (see "Accessories" on page 16).
Connect the microphone to the blue socket AUDIO
transmitter.
Position the microphone in front of the loudspeaker of your
sound source. You can change the sound by varying the
position of the microphone in front of the loudspeaker.

Connecting the transmitter to the mains

Connect the mains unit to the yellow socket (9 V
transmitter.
Plug the mains connector into a wall socket.
Align the antenna
Note:
Pull the mains connector out of the wall socket when the
transmitter will not be used for extended periods of time
(e.g. when you are on holiday). In this case, however, the
rechargeable battery will not be recharged.
to the SCART adapter
to the SCART socket on your TV.
vertically.
.
on the
) on the
DC