Dell Dimension V400 Service Manual page 78

A-4 Dell Dimension V xxx and V xxx c Systems Service Manual
7DEOH $ $GYDQFHG 6FUHHQ 0HQX 2SWLRQV
2SWLRQ )XQFWLRQ
Plug & Play Determines whether the system is configured to
O/S support Plug and Play devices from the operating
system or from the system BIOS. Leave this option
set to No so the BIOS handles all Plug and Play
operation.
NOTE: Be sure this option is set to No before run-
ning Dell Diagnostics. Otherwise, some diagnos-
tics may incorrectly fail.
Permits resetting Plug and Play configuration data
Reset
Configura- to default values. Yes resets the data; No (default)
tion Data retains the current Plug and Play settings. If set to
Yes, configuration data reverts to default values the
next time the system boots. This option automati-
cally reverts back to the No setting.
Numlock Selects the power-on state for Num Lock. Options
are Auto (default), On, and Off.
Peripheral Displays the Peripheral Configuration submenu.
Configuration Refer to "Peripheral Configuration Submenu"
found next in this appendix.
IDE Displays the IDE Configuration submenu. Refer to
Configuration "IDE Configuration Submenu" found later in this
appendix.
Diskette Displays the Diskette Options submenu. Refer to
Options "Diskette Options Submenu" found later in this
appendix.
DMI Event Displays the DMI Event Logging submenu. Refer
Logging to "DMI Event Logging Submenu" found later in
this appendix.
Video Displays the Video Configuration submenu. Refer
Configuration to "Video Configuration Submenu" found later in
this appendix.
Resource Displays the Resource Configuration submenu for
Configuration allocating IRQs and memory ranges. Refer to
"Resource Configuration Submenu" found later in
this appendix.
NOTE: The Glossary in the Online Guide defines abbreviations and acronyms.