Processor Heat Sink Module; Removing The Processor Heat Sink Module - Dell Precision 7820 Owner's Manual

Processor heat sink module

Removing the processor heat sink module

1 Follow the procedure in
NOTE: Ensure that you have Torx 30 screwdriver to remove the processor heat sink module (PHM).
2 Remove the:
a side cover
b air shroud
3 To remove the heat sink:
a Remove the four heat sink screws [1], in the diagonal order (4, 3, 2, 1).
b Lift the heat sink away from the CPU slot on the system board.
CAUTION:
50 Removing and installing components
Before working inside your
CPU will be removed with the heat sink.
computer.