Installing the rear system fan
1
Insert the fan assembly on one side to align it with the screw tab on the PSU bracket.
2
Press the assembly on the other side to align it with the screw tab on the PCI bracket.
3
Tighten the two screws to secure it with the system.
4
Connect the two fan cables to the system board.
5
Install the:
a
processor heat sink module(PHM)
b
side cover
6
Follow the procedure in
Front system fan
Removing the front system fan
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
c
PCIe holder
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
47