Installing the internal chassis speaker
1
Press and hold the tabs on either side of the intrusion speaker, and slide the speaker module into the slot to secure it to the system.
2
Connect the internal chassis speaker cable to the connector on the system chassis.
3
Install the:
a
5.25 inch ODD bracket
b
front bezel
c
side cover
4
Follow the procedure in
Air shroud
Removing the air shroud
1
Follow the procedure in
2
Remove the
side cover
3
To remove the air shroud:
a
Holding the shroud at both the ends, press the tabs[1] and then lift the shroud[2] from the system.
After working inside your computer
Before working inside your
computer.
Removing and installing components
35