Installing The Air Shroud; Memory; Removing The Memory Module; Installing The Memory Module - Dell Precision 7820 Owner's Manual

Installing the air shroud

1 Place the shroud into its position and make sure that the tab fits into the system.
2 Align the shroud to its locking tab.
3 Press down the shroud until it clicks into place.
4 Install the side cover.
5 Follow the procedure in

Memory

Removing the memory module

1 Follow the procedure in
2 Remove the following:
a side cover
b air shroud
3 Press the memory module retention tabs on each side of the memory module.
4 Lift the memory module out of the memory slot on the system board.
WARNING: Rotating the memory module out of the slot will cause damage to the memory module. Ensure to pull it
straight out of the memory module slot.

Installing the memory module

1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module slot.
3 Press the memory module firmly until the retention tabs click into place.
NOTE: Do not pull the retention levers up. Always press down firmly on the module until the levers lock into place
unassisted.
4 Install the:
a air shroud
b side cover
5 Follow the procedure in
36 Removing and installing components
After working inside your computer.
Before working inside your
After working inside your computer
computer.