Dell Precision 7820 Owner's Manual page 67

NOTE: You cannot upgrade the PCoIP host driver software while a VMware View-brokered PCoIP session is active between a
host workstation or host PC and VMware View client. Doing this will result in losing access to your mouse and keyboard when the
driver software is removed.
To upgrade the PCoIP host driver software in this type of deployment, do one of the following:
• Connect to the host from a zero client.
• Upgrade the software while connecting to the host through another desktop-remoting protocol such as RDP or VNC.
Installing the PCoIP Host Driver Software on a Host PC:
1 Download the PCoIP host driver software from the Teradici Support site (click Current PCoIP Product and Releases).
2 Log in to the administrative web interface for the host card.
3 From the Configuration > Host Driver Function menu, enable the Host Driver Function.
4 Restart the host PC.
5 Install the PCoIP host software package appropriate for the operating system installed on the host PC. You can start the install
process by double-clicking the installer:
a 64 bit: PCoipHostSoftware_x64-v4.3.0.msi (or later)
6 When the Welcome screen appears, click Next.
7 Accept the terms, and then click Next.
8 Ensure that the installation location is correct, and click Next.
9 Click Install.
NOTE:
For Windows 7, when the driver is installed, a Windows Security dialog may appear. Click Install to continue with the
installation. To keep this dialog box from appearing in the future, select Always trust software from Teradici Corporation.
10 If prompted, restart the operating system; otherwise, skip this step. When restarted, the host driver software installation process
continues when the OS boots up. Click Install to continue.
11 Click Finish to complete the installation.
Technology and components 67