Table of Contents
Advertisement
S A F E T Y F E A T U R E S
Forward Collision Warning
With Mitigation —
If Equipped
The Forward Collision Warning (FCW) system pro-
vides the driver with active braking, audible and visual
warnings (within the instrument cluster display) and
may apply a brake jerk to warn the driver when it
detects a potential frontal collision. The warnings and
limited braking are intended to provide the driver with
enough time to react and avoid or mitigate the poten-
tial collision.
FCW monitors the information from the forward-
looking sensor, as well as the Electronic Brake Control-
ler (EBC) and wheel speed sensors, to calculate the
probability of a collision. When the system determines
that a collision is probable, a warning message (both
audible and visual) will be displayed within the cluster
display along with a brake jerk warning (previously
enabled in the Uconnect Settings). When the system
senses the driver applying the brakes to avoid a prob-
able collision, additional brake force will be provided
to the vehicle. When the system determines a collision
with the vehicle in front of you is no longer probable,
the warning message will be deactivated.
NOTE:
The FCW feature can be customized and turned off
through the Uconnect System touchscreen.
For further information and applicable warnings and
cautions, please refer to your Owner's Manual at
www.chrysler.com/en/owners/manuals.
LaneSense — If Equipped
The LaneSense system is operational at speeds above
37 mph (60 km/h) and below 112 mph (180 km/h). The
LaneSense system uses a forward looking camera to
detect lane markings and measure vehicle position
within the lane boundaries.
Turning LaneSense ON Or OFF
The default status of LaneSense is "OFF". The Lane-
Sense button is located on the switch panel below the
Uconnect display.
LaneSense Warning Message
The LaneSense system will indicate the current lane
drift condition through the instrument cluster display.
The instrument cluster display will provide a visual
warning depicting the unintentional lane departure.
When both lane markings are detected and the driver
unintentionally drifts out of the lane (no turn signal
applied), the LaneSense system provides a haptic
warning in the form of torque applied to the steering
wheel to prompt the driver to remain within the lane
boundaries. The driver may manually override the
haptic warning by applying torque into the steering
wheel at any time. When only a single lane marking is
detected and the driver unintentionally drifts across
the lane marking (no turn signal applied), the Lane-
Sense system provides a visual warning through the
instrument cluster display to prompt the driver to
remain within the lane. When only a single lane mark-
ing is detected, a haptic (torque) warning will not be
provided.
NOTE:
The LaneSense system can be customized and turned
off through the Uconnect System touchscreen.
For further information and applicable warnings and
cautions, please refer to your Owner's Manual at
www.chrysler.com/en/owners/manuals.
Advertisement
Table of Contents
