Table of Contents
Advertisement
The charge indicator will illuminate from left to right
(when viewed from outside the vehicle), one light at a
time, to indicate that there is a scheduled charge
enabled.
NOTE:
The lights scroll one at a time when the vehicle is
plugged in outside of its charging schedule time/date,
and it is waiting on the schedule to begin charging. In
the event of an error in the charging process the outer
two lights will blink.
For further information, and applicable warnings and
cautions, please refer to the Owner's Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
H O O D
Hood Ajar
This vehicle is equipped with an electric cooling fan
mounted behind the radiator that starts automatically,
and may start at any time. Your vehicle may determine
the fan needs to start and to run if engine coolant is too
hot, if the ambient air temperature is too high, or if the
vehicle is charging and the hood is open. Even after
the vehicle is turned off, the fan may start without
warning and run for several minutes. Be aware of this if
you are working in the engine compartment. Always
keep fingers and tools away from the fan blades.
The radiator fan and surrounding components must
be serviced by your authorized dealer.
S A F E T Y F E A T U R E S
Forward Collision Warning
With Mitigation — If
Equipped
The Forward Collision Warning (FCW) system can
provide the driver with active braking, audible and
visual warnings (within the instrument cluster display)
and may apply a brake jerk to warn the driver when it
detects a potential frontal collision. The warnings and
limited braking are intended to provide the driver with
enough time to react and avoid or mitigate the poten-
tial collision.
The system status can be selected to: "Off", "Only
Warning", and "Warning & Braking". "Warning & Brak-
ing" status with "Medium" sensitivity are the default
settings, but can be changed within the Uconnect
settings under "Safety and Driving Assistance".
FCW monitors the information from the forward-
looking sensor, as well as the Electronic Brake Control-
ler (EBC) and wheel speed sensors, to calculate the
probability of a collision. When the system determines
that a collision is probable, a warning message (both
audible and visual) will be displayed within the cluster
display along with a brake jerk warning (previously
Advertisement
Table of Contents
