Related Manuals for Kogan KA14CYCVACA
Summary of Contents for Kogan KA14CYCVACA
- Page 2 Safety & Warnings ....................... 1 Product Overview.........................2 Assembly..........................3 Usage............................4 Product Maintenance......................6 Disposal...........................6 ・Read all instructions before using this appliance. ・Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use. ・To reduce the risk of electric shock, do not use outdoors or on wet surfaces. ・Use only as described in this manual.
- Page 3 1. Floor Nozzle 5. Suction Hose Connection 9. Cord Retraction 2. Telescopic Tube 6. Carrying Handle 10. Exhaust Filter Button 3. Air Slide 7. ON/OFF Button 11. Crevice Nozzle 4. Suction Hose 8. Dust Release Button 12. Furniture Nozzle The floor nozzle has two settings. When cleaning hard surfaces (parquet flooring, flooring tiles, etc.), the nozzle brushes should be extended.
- Page 4 1. Attach the hose to the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out. 2.
- Page 5 1. Before using the device, first extend the power cable to the appropriate length and plug into the mains socket. The yellow mark is the maximum length that must not be exceeded. To switch on the device, press the foot pedal button.
- Page 6 3. Lift the dust container forwards out of the cylinder vacuum cleaner. 4. When emptying the dust container, hold it low over a dustbin. 5. Press the “open” button. The base opens and the dust runs into the dustbin. 6. Carefully knock the remaining dust loose. 7.
- Page 7 5. Insert the dry protective motor filter back into its holder. 6. Replace the filter cover by aligning it from above and pressing until it audibly clicks into place. 7. Close the dust container base. 8. Replace the dust container and ensure it is securely attached. The exhaust air filter is the final step of filtration.