Install.and.use.the.gimbal; Onboard.camera - AEE CONDOR series User Manual

aee.com
2.5 Install and Use the Gimbal
Please install the gimbal I12 onto the UAV as shown in fig. 12 below.
Note: turn the gimbal fastener to the UNLOCK position before the installation.
2.6 Onboard Camera
The onboard camera is powered by the UAV battery. Through the APP on your mobile device or the functional
keys on the remote control, you can shoot photos, record videos, stop recording videos and perform other
operations. The camera supports the single shot mode.
Camera Specifications
Resolution
Video FOV
Sensor
Lens
HD video resolution
File format
Storage card
2.6.1 Functional Keys of the Camera
Shoot key: press the shoot key on the remote control or in the APP to shoot one photo.
Record key: enable the onboard camera to start/stop recording the video by pressing the record key on the
remote control or in the APP.
2.6.2 Camera Data Copying
To copy the photos/videos from the onboard camera, remove the micro SD card from the micro SD slot after
powering off the UAV.
16.0M
Up to 100°
1/2.3 12.4M Exmor R sensor
F/NO=2.6±5%, spherical
UHD: up to 3840×2160P, 30fps
FHD: up to 1440P, 60fps
HD: up to 720P, 200fps
Photo: JPG
Video: MP4 (H.264 compression)
External TF card, up to 64G (data rate: U1 or above)
Fig. 11
16