Micro.sd.slot - AEE CONDOR series User Manual

Low power
System error (smart
battery error)
Calibrating
Calibrated
successfully
Note:
(1) Low power alarm sound:
Level-1 alarm: Di-Di-Di (slowly)
Level-2 alarm: DiDi-DiDi-DiDi (quickly)
(2) Each system status will be indicated with text or icon on the remote control screen or at the APP
interface on your mobile phone.
2.4 Micro SD Slot
To use Condor to shoot photos/videos, remove the gimbal camera and insert the micro SD card into the micro
SD slot of the camera before powering on Condor. The onboard camera supports up to 64GB micro SD card.
Breathe Flash slowly
Breathe Flash slowly
Breathe Flash slowly
Breathe Remain on
Level-1 alarm: flash
slowly (1s on and 1s off.
The UAV will auto land
in 6min)
Level-2 alarm: flash
quickly (0.1s on and
0.1s off. The UAV will
auto land in 5s)
The front and rear (red) arm LEDs flash alternately.
Remain on
Remain on
Fig. 10
15
aee.com
Level-1 low power: both the
front and rear (red) arm LEDs
flash slowly
Level-2 low power: both the
front and rear (red) arm LEDs
flash quickly
Compass calibration:
At the beginning: flash slowly
in yellow
In the process: flash slowly
in green
Same as the relevant mode
LED