Troubleshooting - Hunter M3630-01 User Manual

Table of Contents

Advertisement

Troubleshooting

Fan doesn't work
• Make sure power switch is on.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin
freely.
• Turn off power from the
circuit breaker, then loosen
the canopy and check all the
connections according to
the wiring diagram on pages
10-11.
Remote control of fan is erratic
• Make sure the battery is
installed correctly.
• Install a fresh battery.
Transmitter only works when
held at close range
• Change battery.
Excessive wobbling
• Make sure the blades are
properly installed on the
blade iron posts.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to
balance the fan.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click "How do I properly install
multiple remote-controlled fans?"
for information on how to correct
this issue.
M3630-01 • 06/06/17 • © 2017 Hunter Fan Company
Noisy Operation
• Make sure the blades are
properly installed on the
blade iron posts.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Use of the HomeKit logo means that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless performance.
HomeKit requires an iPhone, iPad, or iPod touch with iOS 8.1 or later.
Controlling HomeKit-enabled accessories away from home requires an Apple TV (3rd generation or
later) with Apple TV software 7.0 or later and an iPhone, iPad, or iPod touch with iOS 8.1 or later.
Android 4.3 or higher
Android and Google Play are trademarks of Google Inc.
Apple, Apple TV, iPhone, iPad, iPod touch, and Siri are trademarks of Apple Inc., registered in the
U.S. and other countries. HomeKit is a trademark of Apple Inc.
21
www.HunterFan.com
Wireless Issues
• Turning the fan on and off at the switch
can resolve some wireless issues.
• Reset the Wi-Fi module by removing
the battery door. Press and hold the
reset button for 5 seconds. The fan and
light LEDs will flash once the module
has been reset.
1.888.830.1326

Advertisement

Table of Contents
loading

Table of Contents