Table of Contents
Advertisement
5 - 12 SE3300 Integration Guide
SE3300 Command and Response Formats (Continued)
Table 5-3
Function
GET_FSTATS
LCD_MODE
EXEC_INLINE
ENTER_BOOTLOADER
AIM_POWER
AIM_BLINK_RATE
Notes:
1. Every command has a 1 byte checksum (last byte of command). See Command Checksum on page 5-4.
2. Every response has a 1 byte status code immediately following the Opcode. See Response Status
Code on page 5-4.
3. These commands/responses have a variable length data field indicated by (A):Array.
See Table 5-4 on page 5-13 for the length of the field based on the param number.
SE3300 Command
Op
SE3300 Command Data
0x81
0x82
(B) # No-light Frames (B) # Frames
0x83
(B) Reserved
0x91
(A) Signature (3 bytes: 0xAA, 0x50, 0x5F) 0x91
0xF3
(B)
0x00* = Aim's duration is controlled by
Exposure and Readout times.
0x01-0xFF = Aim's duration increments
from 0.5 ms in 0.5 ms duration, its
maximum value controlled by Exposure
and Readout time.
0xF4
(B) On Time
in ~17ms increments
Note1
Op
SE3300 Response Data
0x81
Returns 5 Bytes as
follows:
(W) Exposure
(B) Gain
(B) BIN
(B) Statistics
0x82
(A) Script Data
0x83
0xF3
-
(B) Off Time
0xF4
-
in ~17ms
increments
SE3300 Response
Note2
Advertisement
Table of Contents
