Clutch System Bleeding - Polaris Outlaw 450 MXR Owner's Manual

Maintenance

Clutch System Bleeding

Always bleed the clutch system at the intervals out-
lined in the Periodic Maintenance Chart beginning on
page 87. Always bleed the clutch system any time the
clutch lever feels unresponsive.
Always use the recommended fluid when bleeding
the clutch system. See page 43.
1. Position the vehicle on a level surface. Turn the
handlebar until the master cylinder is in a hori-
zontal position.
2. Remove the two cover screws, the cover and the
rubber boot.
3. Fill a bleeder syringe (1) with the recommended
hydraulic clutch oil.
138
1
2
3