Pre-Ride Inspection
Coolant (if applicable)
Coolant hoses (if applicable)
Throttle
Indicator lights / switches
Engine stop switch
Air filter
Air box sediment tubes
Headlamp
Brake light / tail lamp
Riding gear
A-arm ball joints
Pre-Ride Checklist
Ensure proper level
Inspect for leaks
Ensure smooth operation
Ensure operation
Ensure proper operation
Inspect, clean, replace as needed
Drain deposits when visible
Verify operation, apply Polaris dielectric grease to
the socket when the lamp is replaced
Verify operation
Wear helmet, goggles, protective clothing
Check freeplay. If the tire moves excessively, do not
operate. See your Polaris dealer.
Operation
Page
109
--
44
40, 41
39
112
--
118
--
13
--
61