4. Troubleshooting
4-1 Failure Display Codes
Safety error
Failure code
Oven overheating error. (Temperature
E-0A
does not reach 650°F[343°C] in any
CAUSE
41
SOLUTION
1) Disconnect power. Open the rear cover.
Disconnect the two harness connectors
to the oven temperature sensor
If there are any problems, replace oven
temperature sensor.
2) Check the broil and bake burners to make
sure they are lighting and burning properly.
3) Check whether DLB , Broil, Bake and
Warming Drawer relay is working normally.
4) Make sure all harness connections are
properly connected and securely fastened to
the PCB.
5) Check the resistance of oven temperature
sensor connector on PCB(Normal