Place these portable pressure recorders anywhere a written record of pressure is needed. You don’t even need to be present to monitor the results. Please keep in mind that Dickson pressure recorders are NOT suit- able for monitoring ammonia, acids, salt water or other corrosive substances.
When installing recorders (1/4” male NPT pressure connection) always tighten the fitting instead of twisting the instrument case. Use a 5/8” wrench. We recommend wrapping the pressure fitting with pipe tape before installing to prevent leaks. Dickson does not recommend using pipe dope as it may clog the capillary.
Page 4
(a high, medium, and low) on new units only. The Importance and Benefits of Regular Calibrations Once you begin to use your precision Dickson instrumentation, regular calibrations are necessary to ensure accurate readings. The following Calibration Services are available: •...
Dickson shall not be liable for consequential or incidental damages resulting from failure or malfunction of its products. Dickson makes no warranty for products not manufactured by it or for any products modified by buyer, or subject to misuse or neglect.
Need help?
Do you have a question about the PW4 and is the answer not in the manual?
Questions and answers