REFERENCE GUIDE ADJUST BUTTONS USER MANUAL & PRODUCT GUIDE DIP SWITCHES BATTERY COMPARTMENT REPLACEABLE SENSOR™ PORT AC ADAPTER Need additional support? Web: DicksonData.com Telephone: 630.543.3747 Email: support@dicksondata.com 6” TEMPERATURE CHART RECORDER 930 S. Westwood Avenue Addison, IL 60101 REV 09/2019...
Page 2
RECORDING TIME POWER 7 Day #2 DOWN The KT6 operates on AC power with an optional 4AA battery backup. Depending on 24 Hour #2 UP chart rotation selected and model; battery backup will last approximately 3 days. POWER Note: ALARM and RELAYS will not operate under battery only power.
Page 3
Note: It is recommended that you use a controlled chamber when determining if calibration is necessary. Adjusting the pen in an open room is not recommended as air flow can vary greatly within a very small area. PEN TIP SLOT PEN ARM Note: User calibration invalidates Dickson’s Certificate of Calibration.
Page 4
OF VALIDATION Why does the display read PROB? Dickson ensures that the Replaceable Sensors™ / Instruments listed below were • Check the sensor pod and KTC probe. Make sure it is properly plugged into the unit. developed, tested and validated together.
Need help?
Do you have a question about the KT6 and is the answer not in the manual?
Questions and answers