Table of Contents
Advertisement
Configuration - Advanced Features - IP
(Optional) Public IP Address
(Optional) Public IP netmask:
Private IP Address
Private IP Netmask
Primary DNS IP Address
Secondary DNS IP address
DHCP
IP RIP
Step 2
Enter the following information:
Note:
To install public servers on your network (e.g., Web or ftp servers), you
need to apply for an IP address for each server plus one for the LAN port of the
AcerRouter 700. All these public IP addresses have to belong to the same IP
network.
Public IP Address: the public IP address for the LAN interface on the
AcerRouter .
Public IP Netmask: the network mask for the public network address on
your LAN.
Private IP Address: the private IP address for the LAN interface on the
AcerRouter 700. The default private IP address is 192.168.168.230. If you
want to create your own private network through other AcerRouters with
remote offices, you need to make sure that each AcerRouter 700 on each
LAN is assigned a unique private IP network address.
However, please note that once you change the private IP address (such as
from the default of 192.168.168.230 to 192.168.167.230) either from the
System IP Configuration
192
255
Enable
Active
APPLY
IP Routing Table
Internet
Modem Interface
(IP address usually assigned by ISP)
LAN Interface
Public IP address
Public computers
on your public
network
.
.
.
.
.
.
.
168
.
168
.
230
255
255
0
.
.
.
.
.
.
.
.
.
Disable
Private IP address
Private
workstations on
your private
network
AcerRouter 700 Series User Guide
Advertisement
Table of Contents
