Table of Contents
Advertisement
AcerRouter 700 Series User Guide
Step 6
When you select Connection Profiles, the Connection Profile Summary
screen appears only if you have existing Connection Profiles.
Connection Profile Summary
Select a Connection Profile
Step 7
Select New from the pull-down menu, and click NEXT. The Interface
Configuration screen appears. For example:
Interface Configuration
Select an interface
Select a Configuration Type
Note:
If you made more than one selection in the SMART Configuration
screen, more Configuration Type options may appear.
Step 8
Select VPN as the interface, and check Remote Office Dial-in/Dial-out
from the list of configuration types.
Step 9
Click NEXT to continue. The Connection Profile Configuration screen
appears.
Connection Profile Configuration
Remote Office Access by VPN
Profile Name
Call Direction
My System Name
My System Password
Incoming Authentication
Remote System Name
Remote System Password
VPN Tunnel
APPLY and TEST
Step 10 Enter the following information:
Profile Name: the name that you will use to identify this remote office
dial-in/dial-out profile.
Call Direction: the direction of the call in the tunnel. If the remote site
will be dialing in, select Incoming Only. If the AcerRouter 700 will be
dialing out to the remote site, select Outgoing Only. Select Both if either
side can initiate the connection.The default setting is Both.
New
Internet access:ISP
NEXT
DELETE
VPN
Remote Office Dial-in/Dial-out
NEXT
Both
CHAP or PAP
NewYork
CANCEL
ADVANCED
6-3
Advertisement
Table of Contents
