Table of Contents
Advertisement
Configuring AcerVoIP and Speed Dial Numbers
AcerRouter 700 Series User Guide
This section describes the steps necessary to configure your 700 for speed dialing
numbers for both AcerVoIP and standard ISDN voice calls.
Step 1
Select SpeedDial Table from the menu:
Configuration - SpeedDial Table
Step 2
From the following SpeedDial Summary screen, select either an existing
SpeedDial number, or New to add a new SpeedDial number. Then click
Next.
SpeedDial Table Entry Configuration
AcerRouter SpeedDial Telephone Access
SpeedDial Number
Name
SpeedDial Type
Remote Phone Number
Remote Sub-Address (Extension)
Remote Voice Port
Remote IP Address
Use AcerTouch
FallBack
Step 3
Enter or modify the following information as necessary:
SpeedDial Number: a 1-8 digit number.
Note:
The SpeedDial table does NOT allow any shortcut dialing number to
start with a zero. Shortcut numbers such as "001" and "002" are not supported,
but "1", "11" or "111" are supported.
SpeedDial Name: a name for the speed dialing number. The speed dial
number will be identified in the directory with this name.
SpeedDial Type - AcerVoIP or Standard ISDN: select whether this
speed dial number is for Voice-over-IP(VoIP) or standard ISDN calls.
Note:
The AcerVoIP options are displayed only when the voice compression
hardware module has been installed in the unit.
Remote Phone Number: the phone number to be called whether this is a
standard ISDN call or a voice over IP call.
Remote Sub-Address: the extension number (if any) associated with the
remote phone number.
Remote Voice Port: which voice port will ring: A, B, C or Default - all
AcerVoIP
Voice Port A
.
Yes
Yes
CANCEL
APPLY
Standard ISDN
.
.
No
No
4-3
Advertisement
Table of Contents
