Advanced Options For Vpn Profiles - Acer 700 Series User Manual

4
Note:
If you set Call Direction to Incoming Only, the My System Name and
My System Password fields do not display. If you set Call Direction to
Outgoing Only, the Remote System Name and Remote System Password
fields do not display
My System Name: the name that the remote system will use to recognize
your network.
My System Password: the password the remote system will use to
authenticate your system
Note:
Make sure the VPN Connection Profile at the remote site is configured
with your System Name and System Password.
Remote System Name: the name of the remote network that is dialing in.
Remote System Password: the password that your AcerRouter 700 will
expect to see from the remote system.
VPN Tunnel: the VPN Tunnel (set up earlier) you will use for this profile.
This is one of the tunnel configurations set up earlier.
Step 11 Click APPLY and TEST when you are done, or select Advanced to enter
advanced options.

Advanced Options for VPN Profiles

Note:
The IPX options shown in this screen only appear if you selected Share
NetWare (IPX) Resource on the SMART Configuration screen.
Connection Profile Configuration
Remote Office Access by VPN
Enable IP
(Optional) Remote IP Address
(Optional) Remote IP Netmask
Enable IPX
IPX RIP/SAP
Set as IPX Default Route
(Optional) Remote IPX Network Number
Enable Bridging
Enable Encryption
Encryption key
Confirm Encryption key
Step 1
Enter the following information:
No
Yes
. .
. .
No
Yes
Enable Disable
No
Yes
Disable
Enable
No
DES
CANCEL OK
AcerRouter 700 Series User Guide
.
.