Acer 700 Series User Manual page 38

3-18
Profiles
If you press the Advanced button from the above Connection Profile
Configuration screen screen appears.
Connection Profile Configuration
Remote Office Access by ISDN
Data Service
Caller ID Authen.
Caller ID Number
STAC Compression
Idle Timeout (0-3600 seconds)
Enable IP
IP RIP
(Optional) Remote IP Address
Remote IP Netmask
Enable IPX
IP RIP/SAP
Set as IPX Default Route
Remote IPX Network Number
Enable Bridging
Use for Internet Access as well
Enable encryption
CANCEL
Step 1
Set any of the following parameters:
Note: The IPX options shown in this screen only appear if you selected Share
NetWare (IPX) Resource on the SMART Configuration screen.
Data Service: choose 64K, 56K, or Auto. Select Auto unless you know
the speed required by the other end of the connection requires either 64K
or 56K.
Caller ID Authen: select Yes if you want the AcerRouter 700 to check the
caller ID before accepting the call. This service may require a special agre
ement with your ISDN service provider.
Caller ID Number: if you enabled Caller ID Authentication, enter the expe
cted Caller ID Number in this field.
STAC Compression: allows outgoing data to be compressed to achieve
Auto
Yes No
Yes No
120
Yes
No
Enable
Disable
. . .
. . .
Yes
No
Enable
Disable
Yes
No
Enable
Disable
Yes
No
No
DES
OK
MULTILINK
AcerRouter 700 Series User Guide