Table of Contents
Advertisement
A CAUTION
When rigging the device, make sure there is no highly
(decoration articles, etc.) within a distance of min.
(decoration articles, etc.) within a distance of min. 1.5 m.
Mount the projector with the mounting-bracket to your trussing system using an appropriate clamp.
Mount the projector with the mounting
During overhead installation the projector must be always secured by a safety rope which is designed
During overhead installation the projector must be always secured by a safety rope which is designed
During overhead installation the projector must be always secured by a safety rope which is designed
to hold the twelvefold weight of the device
to hold the twelvefold weight of the device. Only safety ropes with quick-release safety faste
elements may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope
over the truss or an appropriate fastening point
over the truss or an appropriate fastening point. Hang up the end in the fastening element and tie up
the locking nut. A safety rope once exposed to fall
A safety rope once exposed to falling load or damaged may not be used furthermore
Adjust the desired inclination angle via the mounting-bracket and tighten the screw.
Adjust the desired inclination angle via the mounting
1.1.3. Power connection
Power connection
Before connecting the item to the main plug, connect the wires to a suitable power plug. The voltage
Before connecting the item to the main plug, connect the wires to a suitable power plug. The voltage
Before connecting the item to the main plug, connect the wires to a suitable power plug. The voltage
and frequency must exactly be the same as stated on the device and makes sure that the power plug
frequency must exactly be the same as stated on the device and makes sure that the power plug
frequency must exactly be the same as stated on the device and makes sure that the power plug
is always inserted without force.
Wires: Brown (L), Blue (N), Yellow/Green (
A NOTE
The connection of the earth wire is strictly recommended! Never leave this
The connection of the earth wire is strictly recommended! Never leave this
The connection of the earth wire is strictly recommended! Never leave this device
running unattended! Every person that is involved with this item has to be qualified!
running unattended! Every person that is involved with this item has to be qualified!
running unattended! Every person that is involved with this item has to be qualified!
If you want to connect the item direct to the common main power grid,
If you want to connect the item direct to the common main power grid, the installation of a separator
with at least a 3 mm contact hole for each pole is necessary
contact hole for each pole is necessary. The connection is exclusively permitted
for electrical installation which complies with the VDE-regulations DIN VDE 0100
for electrical installation which complies with the
must be equipped with an earth leakage circuit breaker (RCD) with 30 mA rated current.
must be equipped with an earth leakage circuit breaker
1.1.4. Cleaning and Maintenance
Cleaning and Maintenance
Contaminations like dust should be removed regularly from the device. Use a damp, lint free, cloth. Do
Contaminations like dust should be removed regularly from the device. Use a damp, lint free, cloth. Do
Contaminations like dust should be removed regularly from the device. Use a damp, lint free, cloth. Do
not use alcohol or solvents under any circumstances. Please make sure that safety
not use alcohol or solvents under any circumstances
mechanical facilities are inspected by a skilled person onc
are inspected by a skilled person once a year.
•
Ensure all screws attached to the device or parts of the device are very tight and not
Ensure all screws attached to the device or parts of the device are very tight and not
Ensure all screws attached to the device or parts of the device are very tight and not
corroded.
•
Make sure there are no deformations of the housing, attachment and installation spot.
This also includes the ceiling, the suspension and the truss
This also includes the ceiling, the suspension and the truss.
•
Electrical connection cables may not have any damages, depositions or signs of material
lectrical connection cables may not have any damages, depositions or signs of material
lectrical connection cables may not have any damages, depositions or signs of material
fatigue e.g. porous connections
fatigue e.g. porous connections.
the device, make sure there is no highly-inflammable material
bracket to your trussing system using an appropriate clamp.
Hang up the safety rope in the hole of the mounting bracket. Direct the rope
Hang up the safety rope in the hole of the mounting bracket. Direct the rope
), Yellow/Green (
there are no deformations of the housing, attachment and installation spot.
there are no deformations of the housing, attachment and installation spot.
inflammable material
Hang up the end in the fastening element and tie up
ing load or damaged may not be used furthermore.
bracket and tighten the screw.
)
The connection is exclusively permitted
regulations DIN VDE 0100. Indoor installation
5 / 9
B L I N D E R B I G 6
B L I N D E R B I G 6
release safety fastener
the installation of a separator
rated current.
safety-related and
Advertisement
Table of Contents
