Table of Contents
Advertisement
•
Power cable, never pull the power cable to remove the plug from the receptacle, be sure to
hold the plug. When not using the device for an extended period of time, be sure to disconnect
When not using the device for an extended period of time, be sure to disconnect
When not using the device for an extended period of time, be sure to disconnect
the plug from the receptacle.
the plug from the receptacle.
•
Make sure that the area under the item is blocked, while mounting it or working on it.
Make sure that the area under the item is blocked, while mounting it or working on it.
Make sure that the area under the item is blocked, while mounting it or working on it.
•
When cleaning, use a clean dry cloth to wipe off the dust,
When cleaning, use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
A NOTE
After taking the device from a warm to a cold room, it may not be put into operation.
fter taking the device from a warm to a cold room, it may not be put into operation.
fter taking the device from a warm to a cold room, it may not be put into operation.
The resulting condensation can possibly destroy the device. Do not turn on the device
The resulting condensation can possibly destroy the device. Do not turn on the device
The resulting condensation can possibly destroy the device. Do not turn on the device
until it has reached ambient temp
until it has reached ambient temperature.
A NOTE
Damages caused by the disregard of this user manual are not subject to warranty.
Damages caused by the disregard of this user manual are not subject to warranty.
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
The dealer will not accept liability for any resulting defects or problems.
The dealer will not accept liability for any resulting defects or problems. Make sure the
electrical connection is carried out by qualified personnel. All electrical and mechanical
electrical connection is carried out
connections have to be carried out according to the European safety standards.
connections have to be carried out according to the European safety standards.
connections have to be carried out according to the European safety standards.
This device falls under the protection class I. It is necessary to follow the instructions.
This device falls under the protection class I. It is necessary to follow the instructions.
This device falls under the protection class I. It is necessary to follow the instructions.
1.1.2. Overhead rigging
Overhead rigging
The suspension devices have to be build an
suspension devices have to be build and measured so they can withstand for an hour the tenfold
of the payload without suffering a permanent detrimental deformation
of the payload without suffering a permanent detrimental deformation. Basically installation has to be
made by using a second separate suspension. This can be e.g. a suitable net. The second
made by using a second separate suspension. This can be e.g. a suitable net. The second
made by using a second separate suspension. This can be e.g. a suitable net. The second
suspension must be designed and attached so no part of the installation can fall down in case of
on must be designed and attached so no part of the installation can fall down in case of
on must be designed and attached so no part of the installation can fall down in case of
failure. The maximum drop distance must never exceed
The maximum drop distance must never exceed 20 cm.
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
areas, on lightning bridges, under elevated work stations or any other danger zones is forbidden
ightning bridges, under elevated work stations or any other danger zones is forbidden
ightning bridges, under elevated work stations or any other danger zones is forbidden.
Before taking the device in operation, the installation must be approved by an expert. The operator
Before taking the device in operation, the installation must be approved by an expert. The operator is
Before taking the device in operation, the installation must be approved by an expert. The operator
obliged to get an expert to check safety-related and mechanical facilities at least once a year
obliged to get an expert to check safety
A NOTE
Overhead installation requires a high level of experience. This includes knowledge of
Overhead installation requires a high level of experience. This includes knowledge of
Overhead installation requires a high level of experience. This includes knowledge of
calculating the payload, used installation material and safety inspections of the used
calculating the payload, used installation material and safety inspections of the used
calculating the payload, used installation material and safety inspections of the used
installation material and the projector whereas the required experience is not limited to
installation material and the projector whe
this. Do not try to carry out installation yourself under any circumstances if you are not
this. Do not try to carry out installation yourself under any circumstances if you are not
this. Do not try to carry out installation yourself under any circumstances if you are not
qualified. Contact a professional installer. An inappropriate installation can lead to
qualified. Contact a professional installer. An inappropriate installation can lead to
qualified. Contact a professional installer. An inappropriate installation can lead to
injuries and/or damaged properties.
injuries and/or damaged propert
If the projector may hang from the ceiling or from high beams, the use of truss systems is mandatory.
If the projector may hang from the ceiling or from high beams, the use of truss systems is mandatory.
If the projector may hang from the ceiling or from high beams, the use of truss systems is mandatory.
The projector may not be installed
The projector may not be installed so it can swing freely in the room.
A CAUTION
Crashing down items
doubt the safety of a possible installation form!
doubt the safety of a possible installation form
ever pull the power cable to remove the plug from the receptacle, be sure to
ever pull the power cable to remove the plug from the receptacle, be sure to
d measured so they can withstand for an hour the tenfold
items can cause serious injuries! Do not install the projector, if you
or a wet soft cloth for stubborn dirt.
Basically installation has to be
cilities at least once a year.
reas the required experience is not limited to
4 / 9
B L I N D E R B I G 6
B L I N D E R B I G 6
lectrical and mechanical
e projector, if you
Advertisement
Table of Contents
