Table of Contents
Advertisement
Important:
Damages caused by the disregard of this user manual are not subject to
Damages caused by the disregard of this user manual are not subject to
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability
warranty. The dealer will not accept liability for any resulting defects or problems.
Make sure the electrical connection is carried out
electrical connection is carried out by qualified personnel
and mechanical connections have to be carried out according to the European safety
and mechanical connections have to be carried out according to the European safety
and mechanical connections have to be carried out according to the European safety
standards.
2. Introduction
Congratulations to your purchase and thank you for selecting one of our products.
your purchase and thank you for selecting one of our products.
your purchase and thank you for selecting one of our products.
The BIG 6 Blinder is a powerful silent lighting device with
is a powerful silent lighting device with 6pcs. conventional Warm White lamps,
Halopar30 230V 75W. For successful installation and secure operation please read the user manu
. For successful installation and secure operation please read the user manual
. For successful installation and secure operation please read the user manu
before starting operating with the device.
before starting operating with the device
3. OPERATION MODES
OPERATION MODES
The device operates in three operating modes, DMX Mode, Program
3.1. DMX MODE
There are 4 different DMX Modes with 1, 2, 3 and 6 Channels.
There are 4 different DMX Modes with 1, 2, 3 and 6 Channels.
The go into the DMX Mode please push Mode until you see A001, SLAV, or CHX. Then push Menu
The go into the DMX Mode please pus
until you see A001.
3.1.1. Selecting DMX Mode
Selecting DMX Mode
A 001
Menu
Mode
3.1.2. Selecting Channel Mode
Selecting Channel Mode
CH:01
Menu
Mode
hree operating modes, DMX Mode, Program Mode and Master Slave
h Mode until you see A001, SLAV, or CHX. Then push Menu
If letter "A" appears, means that DMX address and shows that the
If letter "A" appears, means that DMX address and shows that the
DMX Mode has been activated. Letter "P" means that you are in the
DMX Mode has been activated. Letter "P" means that you are in the
Chase Mode. With "Mode" button can you change between the two
Chase Mode. With "Mode" button can you change between the two
modes.
Tap "Menu" button to select to Channel Mode. When letters "CH"
Tap "Menu" button to select to Channel Mode. When letters "CH"
followed by 2 numbers (01,02,03,06) than you are on the Channel
Mode.
Channel Value Selection: Tap "Up
between the channel 01, 02, 03 and 06.
"CH:01", all channels are controlled by one DMX channel.
"CH:01", all channels are controlled by one DMX channel.
"CH:02", channel 1,2 and 3 are controlled by DMX channel, channel
4,5 and 6by other DMX channel.
"CH: 03", channel 1 ,2 will be controlled by one DMX channel, the
3,4by another dmx channel and 5,6 by other DMX Channel.
"CH :06", each channel is controlled by one DMX Channel.
", each channel is controlled by one DMX Channel.
for any resulting defects or problems.
by qualified personnel. All electrical
pcs. conventional Warm White lamps,
) than you are on the Channel
" or "Down
lled by DMX channel, channel
rolled by one DMX channel, the
by other DMX Channel.
6 / 9
B L I N D E R B I G 6
B L I N D E R B I G 6
and Master Slave.
" to select
Advertisement
Table of Contents
