System Set-Up Mode Functions; System Set-Up Mode; Input Selection - JR XP810-3 Manual

3. System Set-Up Mode Functions

3.1 System Set-Up Mode

To set the System Set-Up Mode, press the UP and DN keys
simultaneously and turn the power switch from OFF to ON.
Functions are selectable by pressing either the DN or UP keys.
Individual settings are explained later at each function. In this
mode, servos are not activated, but operating signals are
Use either the UP
or DN key to scroll
through the menu
and access the
applicable function
System Set-Up Mode
[INFO-DISP]
www.modelflight.com.au
transmitting (only when the Tx module is in place). However, use
extra caution not to interfere with other frequencies. By pressing
the DN and UP keys simultaneously, you can return to the normal
display, which allows the servos to again operate.
Pg. 66
Pg. 66
Pg. 67
Pg. 68
Pg. 68
Pg. 69
Pg. 70
Pg. 72
HELI 64
– World's best source of JR products
Information Display
Model Selection and Copy Function
Model Name Input
Model Type Selection
Data Reset
Modulation Selection
Data Transfer
Input Selection –
Aux 2, channels can be used for gyro
sensitivity adjustment