Schwinn IC3 Assembly And Owner's Manual page 12

6. Install Batteries in Console
Note: The console uses AA size batteries (SUM3). Make sure that the batteries point in the direction of the +/– indicators in
the battery bay.
Do not mix old and new batteries.
!
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
7. Connect and Attach the Console
NOTICE: Remove the pre-installed screws(*) from the back of the Console before you connect the cable. Do not crimp the
cable.
12
X4
#2
10
X2
+
11
-
10