Specifications; Before Assembly - Schwinn IC3 Assembly And Owner's Manual

SPECIFICATIONS

Specifications
Maximum User Weight:
Machine Weight:
Dimensions:
Power Requirements:
Operating Voltage:
WARNING! This product, its packaging, and components contain chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 97" x 69" (2.5 m x 1.8 m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, carefully lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
6
300 lbs. (136 kg)
101 lbs. (46 kg)
48.7" x 21.2" x 49.8" (123.7cm x 53.9cm x 126.6cm)
2 AA Batteries (SUM3)
3VDC