Playing A Song; Monitoring Through Headphones; Closing Serato Dj - Roland DJ-505 Owner's Manual

Using Serato DJ

Playing a Song

1
Set the DJ-505's knobs and switches as follows.
[MASTER LEVEL] knob
[TRIM] knobs
[HI], [MID], [LOW] knobs
[FILTER] knobs
Channel faders
Cross fader
[CH 1], [Ch 2] switches
Press the [ r ] button to play back the loaded song.
2
3
Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level in the level indicator is lit in
the orange-colored area.
4
Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.

Closing Serato DJ

1
Close the Serato DJ screen.
Mac OS
In the upper left of the Serato DJ screen, click the [ 6 ] (red: close) button.
Windows
In the upper right of the Serato DJ screen, click the [X] button.
A confirmation screen appears.
2
Click [Yes] to close Serato DJ.
3
Turn off the power of the equipment that's connected to the
DJ-505.
4
Press the [POWER] switch to power-off the DJ-505.
12
Turned all the way to the left
Center
Lowest position
Center
"PC" position

Monitoring Through Headphones

1
Set the DJ-505's knobs as follows.
[MIXING] knob
Turned all the way to the left
[VOLUME] knob
2
Press the channel [CUE] button of the channel that you want to
monitor.
3
Turn the [VOLUME] knob toward the right to adjust the
headphone level.