Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Disconnect the speaker cable from the system board.
2
Remove the speaker cable from the routing guide on the computer base.
3
Peel off the tapes that secure the speaker cable to the touch-pad bracket.
4
Release the speakers from the tabs on the computer base.
36
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before